2 Stroke 32.7cc Gas Powered T Post Driver Fence Pile Driver Jack Hammer W/Chisel

<p></p> <p><i><b>Details</b></i></p> <ol> <li>Safety Lock: It prevents unnecessary injuries caused by accidental switching on.</li> <li>Proportioning Pot: It helps you to mix the right proportion of oil and petrol to keep your engine in good working condition.</li> <li>Practical Air Filter: It can filter out impurities in time, avoid blocking and ensure smooth operation.</li> <li>Two Sleeves: Two sleeves of different sizes allow wider application, and the threaded connection is also convenient for you to replace.</li> <li>Ergonomic Handle: It is comfortable, anti-slip, and shock-absorbing, effectively reducing fatigue during work.</li> <li>Flexible Throttle Switch: It allows you to freely control the speed of pile driving.</li> <li>Application:It is suitable for a range of piling projects in gardening, road fencing, agricultural fencing, orchard support, geophysical exploration, construction, vegetable planting, fence protection, etc.</li> </ol> <p><i><b>Specifications</b></i></p> <ul> <li>Model: Jh-55</li> <li>Material: ABS, Iron, Aluminum, Alloy Steel</li> <li>Color: Red, Black</li> <li>Power Source: Gasoline Powered</li> <li>Starter System: Hand Pull Start</li> <li>Engine Type: Single Cylinder, Air Cooling, 2-Stroke</li> <li>Impact Frequency: 1700-2230BPM</li> <li>Impact Energy: 25-50J</li> <li>Fuel: Oil Mixture (Gasoline:2-Stoke Engine Oil=25:1)</li> <li>Fuel Capacity: 0.9L/0.24gal</li> <li>Fuel Consumotion Rate: ≤0.5L/h(0.13gal/h)</li> <li>Displacement: 32.7cc</li> <li>Max. Power and Speed: 1000W/7000r/min</li> <li>Max. Torque and Speed: 1 .45N.m/5300r/min</li> <li>Pile Head Size: φ55mm/2.16in(Small), φ70mm/27.56in(Big)</li> <li>Product Size: 32*28*54cm/12.6*11*21.26in</li> <li>Packing Size: 64.5*34*37cm/25.4*13.4*14.6in</li> <li>Net Weight: 16kg/35.3lbs</li> <li>Gross Weight: 17.5kg/38.6lbs</li> </ul> <p><i><b>Package Included</b></i></p> <ul> <li>1* Pile Driver</li> <li>1*Proportioning Pot</li> <li>1* English Manual</li> <li>2* Sleeves</li> <li>1* Conversion Head</li> <li>1* Chisel</li> <li>1* Funnel</li> <li>All Accessories for Installation</li> </ul> <p><i><b>Notes</b></i></p> <ol> <li>The carburetor must be cleaned after every 100 hours of operation. The air filter sponge must be cleaned after 36 hours of operation.</li> <li>Before use, please carefully read the English manual and follow the precautions.</li> <li>If not used for a long time, the fuel and oil must be cleaned out of the tank and packed in a plastic bag to avoid dust and moisture entering the machine and affecting its use.</li> <li>Pay attention to whether the oil inlet pipe is full of oil before use.</li> <li>After starting up, you need to empty the throttle and let the machine start for a while before starting work.</li> <li>When starting the product, please pull the starter quickly and continuously without stopping, and do not pull too hard.</li> <li>Please note that this product cannot be used for piling in water.</li> </ol>